printing a dodecahedron box
First, model a dodecahedron box in your fancy 3D modeller.
I use Cheetah 3D.
Do a test print in PLA plastic on the Cube printer.
Looks good, setup a print for the fancy printer.
The print time is mostly a function of height alone,
so I add several copies horizontally.
The fancy printer at work.
The print is made of plastic, with a supporting matrix of solid wax.
(No Picture: wait 11.5 hours)
(But embedded in wax and stuck to the printing plate)
Pop the prints off the printing plate by putting it in the freezer for a while.
Still embedded in wax.
Melting the wax off: One hour at 75°C.
Wax off !
No Photo: washing the remaining wax off in Soy Orange solvent.
Enjoy responsibly with friends.